VHP PUMP ATL1-7.5 and ATL1-15 are designed for light industry; with the small size and power, high water pressure, small diameter of jet distract, sharp and quick of cutting, it can be used in three-dimensional station if equipped with robot, also used in plane station equipped with digital control.This cutting machine can feed a nozzle with Φ0.15mm andΦ0.17mm.The equipment designed to apply in pure water cutting.
TECHNICAL PARAMETER | ATL1-15 | ATL1-7.5 |
General information | power | 15/20 | 7.5/10 |
Unladen weight (kg) | 400 | 300 |
Length (mm) | 1000 | 1000 |
Width (mm) | 700 | 700 |
Height(mm) | 1000 | 1000 |
Hydraulic system | Tank capacity | 60 | 60 |
Recommended oil | ISO68 | ISO 68 |
Pump flow rate (1/mn) | 40 | 25 |
Working pressure (bar) | 190 | 190 |
Electrical supply | Voltage (VAC) | 400 | 400 |
Current(A):Absorbed/protection | 35/40 | 15/20 |
Frequency (HZ) | 50 | 50 |
Water cutting | 5 1/mn at 3 bars | 4 l/mn at 3 bars | 2 1/mn at 3 bars |
Maximum flow rate (1/mn) | 1.5 | 0.8 |
Maximum wording pressure (bar) | 4000 | 4000 |
Low pressure inlet connection | 19 | 19 |
VHP pressure outlet connection | 1/4 | 1/4 |
Lubrication | 400/230 | 400/230 | 400 /230 |
Amperage (A) | 0.4 | 0.4 |
Working pressure (bar) | 12 | 12 |
Air/oil exchanger (option) | 0.45 | 0.25 | 0.12 |
Voltage (V) | 230 | 230 |
Amperage (A) | 0.52 | 0.26 |
Frequency (HZ) | 50/60 | 50/60 |
Water/oilexchanger | Water cooling supply minimum flow Rate | 10 1/mn at 10 | 10 1/mn at 10 |
Sound level with air cooling | 1 m distance from the pump (dBA-Leq) | 75 | 75 |
Water filters | 2 low pressure filter | 5pand 1p | 5 p and 1p |
